Click on the image to check the artwork
Overview
Pneumatic Shear Cut Knife Holder is made of high quality steel, suitable for shearing hard thick materials or high-speed strips. It uses a depth adjustment screw to easily control the downstroke overlap distance between the upper and lower inserts, helping to compensate for overlap as the inserts wear. Unscrew the angle plate and rotate the bottom knife holder, the machine can adapt to different web path directions to obtain better efficiency. In addition, the maximum speed of the pneumatic shear cut knife holder can reach 1200M/min and its lower knife depth can be adjusted individually.
Specification
Max. Knife stroke |
20mm |
Side closed stroke |
2. 5mm |
Working pressure |
3.5-6bar |
Max slitting speed |
600m/min |
Min. slitting width |
38mm |
Size of quick change adaptor |
01/8"-28 |
Max paper cutting capacity |
400g per square meters |
Max films cutting capacity |
0.4mm |
Note: The standard width is 38mm, and the special width is less than 30mm.
Applications
This Pneumatic Shear Cut Knife Holder is suitable for building material stores, manufacturing plants, food and beverage factories, farms, restaurants, printing houses, food and beverage stores, others, advertising companies, etc.
Advantages
Durable construction of the machine, easy adjustment, quality of slitting and cost-effectiveness.
http://www.nj-heshen.com/